Tag: case study

Coating Refurbishment of Domain Tunnel Ventilation Stack, Melbourne Case study submitted by Mattioli – Innovators in Protective Coatings, who are a leading protective coating applicator in Australia, based in Victoria. Transurban’s Grant Street Ventilation Stack for the Domain Tunnel has recently been…

Geraldton Concrete Silos Remediation: A case study in the structural strengthening and concrete repair practices utilised for the ongoing operation efficiency and durability of concrete silos J Barry, S Robertson & A Mesic, Freyssinet Australia Pty Ltd Project Overview The CBH Group is…

The world’s first hybrid corrosion protection systems for prestressed concrete bridges C. Christodoulou, R. Kilgour – AECOM Many reinforced concrete structures suffer from corrosion damage. Causes include salt ingress due to the application of de-icing salts during winter maintenance, exposure to marine…

Tanks for the Refreshment: volume transport of clean, health essentials of life Tanks are everywhere. In their infinite variety of shapes, sizes and uses, they are vital to a functioning society. When it comes to food, however, and chances of contamination or…

Tie in Channel Lining Works – Retrofitting ‘Off the Shelf’ Products for a Better Outcome By Gianni Mattioli, Mattioli Challenge: During the installation of a new section of their sewage grit and screen filter system at Melbourne Water’s Eastern Treatment Plant, a…

Cathodic Protection of a Sewage Treatment Dissolved Air Flotation Tank T Tjandra, Freyssinet Australia Pty Ltd Dissolved Air Flotation (DAF) Tanks are used to clarify waste waters by removing suspended solids, oils and other contaminants. A pressurised stream of air saturated, clarified…

50 years of coatings testing at SA water Paul Vince, Principle Materials Engineer, SA Water Background SA Water owns and has managed South Australia’s water infrastructure for over 150 years and provides water and wastewater services to 1.6 million people. With 43…

University galvanized to face the future The Galvanizers Association of Australia represents many of the leading galvanizing companies throughout Australia, New Zealand and Asia. Established in 1963, the Association works with companies like IG to ensure the highest standards in design and…